10 x CSB HR1234W UPS Backup Batteries

10 x CSB HR1234W 12 volt 9 Ah sealed lead acid battery with F2 terminals from AtBatt. HR1234W is designed for equipment that requires short term bursts of high rate power for UPS systems. HR1234W will deliver up to 20% more energy output density at 34 watts per cell, or up to 204 watts for 15 minutes to 1.67 volt per cell at 77 degrees in Fahrenheit. HR1234W is also excellent for general applications as it will provide up to 260 cycles at 100% depth of discharge and has a design life of up to five years of stand-by usage.

Features

• Same volume same quality level can advance high energy output density for an increase of 20%
• High energy output, high cycling life, high rate discharge
• Best suited for high rate intensive applications and high efficient UPS
• Replaces most standard 12V 7Ah, 7.2Ah, 7.5Ah, 8Ah, 8.5Ah, and 9Ah batteries
• Absorbed Glass Mat and Valve Regulated Lead Acid design for maintenance-free use
• Special formula for lead ally and automatic processing to eliminate dangerous gas generation
• Low self-discharge rate
• Cycle or standby (float) use
• Deep discharge recovery ability
• ISO9001 and 14001 certified
• UL recognized components under UL 924, CSB file number MH14533
• IATA/ICAO compliance for Special Provision A67 for air transport
• Classified per MG Amendment 27 as a non- hazardous material for water transport
• Recognized by DOT as Dry Charge 49 CFR 171-189 for surface transport

Fits
Eaton Powerware 103003217-001
Eaton Powerware Powerworks RS 3k
Eaton Powerware PW9104
Eaton Powerware PW9104 RS 3 k
Eaton Powerware PW9125-6000
Powerware 103003217-001
Powerware Powerworks RS 3k
Powerware PW9104
Powerware PW9104 RS 3 k
Powerware PW9125-6000

HR1234W_Spec_Sheet

CSB-Safety-Data-Sheet

WARNING :

This Battery, Battery Posts, Terminals, and Related Accessories can expose you to chemicals including Lead, Lead Compounds and other chemicals which are known to the State of California to cause Cancer and birth Defects or other reproductive harm. Wash hands after handling. For more information go to: www.P65Warnings.ca.gov